I recently installed this white Hypervolt EV charger for a homeowner in King’s Sutton, near Banbury.

Hypervolt EV Charger Installation in King’s Sutton, Banbury

I’m based in the village and run L J Mullan Electrical, so this one was close to home. If you’re getting an electric car or plug-in hybrid, here’s how this EV Charger Installation came together and what I look at when quoting for a home charger.

A wall-mounted Hypervolt charger

Hypervolt EV Charger Installation in King’s Sutton, Banbury Hypervolt EV Charger Installation in King’s Sutton, Banbury Hypervolt EV Charger Installation in King’s Sutton, Banbury

For this job, I mounted the Hypervolt on an outside wall next to the timber fence. I ran the supply cable low along the wall before bringing it straight up into the charger. The charging lead is tethered, so it stays attached to the unit and wraps around it between charges. That keeps the lead off the ground and ready for the next time you pull in.

One thing I ask homeowners to think about is where the charging port sits when the car is parked as usual. A spot that looks ideal on the wall can be awkward if you have to stretch the cable around the car every evening. It’s worth thinking about both parking spaces if you share a driveway or sometimes park facing the other way.

Choosing a spot that works day to day

With a tethered charger like this one, it helps to picture the whole routine. Where will you get out of the car? Can you reach the plug comfortably? Will the lead cross the path to the front door or the route you use to take the bins out? Those everyday details can make one position much more convenient than another.

I also look at how the supply cable will sit against the outside of the house. On this King’s Sutton job, bringing it up from below kept the visible run on the wall to a single vertical line beneath the charger. At another property, the best route might be through a garage or along a different wall. I’ll talk you through where the cable would go so you know what to expect before the job starts.

What I check before quoting for an EV charger

I look at where you normally park, where your meter and consumer unit are, and how I can route the cable to the proposed charger location. I also check the existing electrical supply and work out what protection and any additional electrical work the installation needs. Two neighbours can choose the same charger and still need different quotes because the layout and cable route are different.

If you already have your eye on a Hypervolt, let me know which one you’re considering when you get in touch. If you’re still waiting for the car to arrive, photos of the parking space, meter and consumer unit are a good starting point. A wider photo that shows the parking space in relation to the house is especially helpful. It gives me a better idea of where the charger might sit and what I’ll need to look at when I visit.

If there’s a gate, an outbuilding or a section of paving between the house and your usual parking spot, mention that too. It helps me understand what the route involves. If you’re planning other work on the driveway or garage, let me know when it’s happening. We can discuss the cable route while you still have options for where it can go.

What happens once the charger is fitted?

Once the charger is in place, I test the installation and show you how to use it. I’ll go through the basics with you, including where to stow the lead and how to start a charge. If you want to charge at particular times, it’s worth checking whether you’ve already set a schedule in the car. That way, we can make sure the charging routine makes sense for how you’ll actually use it.

A local electrician who specialises in smaller jobs

I’m Luke, the electrician behind L J Mullan Electrical. I’m a NAPIT-registered sole trader based in King’s Sutton, and I carry out the work myself. I fit home EV chargers around Banbury, Brackley and the surrounding villages, alongside the smaller electrical jobs I specialise in, like fitting an extra socket, replacing a faulty extractor fan or upgrading a light fitting.

If you’re looking for a local EV charger installer in King’s Sutton, Banbury or Brackley, get in touch with L J Mullan Electrical. Let me know what you drive or have on order, where you normally park and whether you already have a charger in mind. I can talk you through what would suit your home and put together a quote for the installation.